OEM Famous PT Pricelist –Silver Electrolytic Copper Expulsion Fuse – HolleyDetail:
Spesifikaasjes
Produkt Type |
| EXPULSION FUSE CUT OUT, 27 kV, 150kVBIL, 100 A 8/12kA, 470MM Creepage Ofstân | EXPULSION FUSE CUT OUT, 38kV, 170kVBIL, 100A, 5/8 kA, 660mm CREEPAGE DISTANCE | EXPULSION FUSE CUTOUT, 27kV, 150kVBIL, 200A, 7.1/10 kA, 432mm CREEPAGE DISTANCE | |
Nee. | Funksjes | Ienheid | Wearde | Wearde | Wearde |
1 | BASIS |
| |||
| Model | HV1 - 27/100 - 8 | HV1 - 38/100 - 5 | HV1 - 27/200 - 7.1 | ||
| Standert | ANSI / IEEE C 37,40 / 41/42 Iec60282 - 2: 2008 | ANSI C-37.40/41/42 and IEC60282-2 | ANSI/IEEE C37.40/41/42 y IEC60282-2:2008 | ||
| Rated hjoeddeistich | A | 100 | 100 | 200 | |
| Beoardiele spanning | kV | 27 | 38 | 27 | |
| Minimum Short Circuit Current | |||||
| - Symmetrysk | kA | 8 | 5 | 7.1 | |
| - Asymmetrysk | kA | 12 | 8 | 10 | |
| Minimum Isolaasjenivo: | |||||
| - Impulse withstand voltage (BIL), phase to ground and between phases. | kV | 150 | 170 | 150 | |
| - Withstand voltage at power frequency between phases, dry, 1 min. | kV | 60 | 80 | 60 | |
| - Withstand voltage at power frequency between phase and ground, in wet, 10s. | kV | 50 | 70 | 50 | |
| Insulating porcelain material of the base with high purity alumina compositions (between 94% to 99%) with the addition of vitrifiers. | Ja | Ja | Ja | ||
| Minimum creepage distance (Phase-Earth) | mm | 470 | 660 | 432 | |
| Kontaktmateriaal | Silver electrolytic copper | Silver electrolytic copper | Silver electrolytic copper | ||
| - Minimum thickness of the top contact silver layer (tab) | μm | 15 | 15 | 15 | |
| - Maximum electrical contact resistance between each terminal and the nearest metal part accessible after contact | Ohm | 0.000099 | 0.000099 | 0.000099 | |
| - Upper contact pressure spring with fastening and alignment mechanism | Stainless steel, grade 304 according to AISI 304, DIN 1.4301 | Stainless steel, grade 304 according to AISI 304, DIN 1.4301 | Stainless steel according to AISI 304, DIN 1.4301 | ||
| Terminals materiaal | Tinned Koper | Tinned Koper | Tinned Koper | ||
| -Conductor Range (Diameter) | mm | 4.11 - 11.35 | 4.11 - 11.35 | 4.11 - 11.35 | |
| -Terminals for use with copper or aluminum conductors | Ja | Ja | Ja | ||
| - Soart terminals | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | ||
| Top support channel material | Galvanized structural steel | Galvanized structural steel | Galvanized structural steel | ||
| - Galvanized Material Standard | ASTM A575 | ASTM A575 | ASTM A575 | ||
| - Galvanizing Standert | ASTM A153 | ASTM A153 | ASTM A153 | ||
| - Minimum average thickness | μm | 86 | 86 | 86 | |
| Minimaal iepening hoeke | 120 ° | 120 ° | 120 ° | ||
| Minimum number of mechanical operations guaranteed | Nee. | 200 | 200 | 200 | |
| Minimum mechanical resistance of the horn for load operation | Dan | 200 | 200 | 200 | |
| Dimensions (See Figure 1) | |||||
| L | mm | 704 | 842 | 704 | |
| M | mm | 409 | 431 | 409 | |
| N | mm | 476 | 567 | 476 | |
| P | mm | 72 | 82 | 72 | |
| Q | mm | 131 | 147 | 131 | |
2 | Fuse Holder Tube | ||||
| Funksjes | |||||
| - Standert | ANSI / IEEE C 37,40 / 41/42 | ANSI / IEEE C 37,40 / 41/42 | ANSI / IEEE C 37,40 / 41/42 | ||
| - Beoardiele spanning | kV | 27 | 38 | 27 | |
| - Rated hjoeddeistich | A | 100 | 100 | 200 | |
| - Minimum symmetrical/asymmetrical short-circuit current | kA | 8/12 | 5/8 | 7.1 / 10 | |
| - Internal diameter range | |||||
| - minimum | mm | 11.1 | 11.1 | 17.5 | |
| - maksimum | mm | 18 | 18 | 23 | |
| - Length (allowable range) | mm | 375 ± 3 | 466 ± 3 | 375 ± 3 | |
| - Metal parts of joining with the base | Cast Brûns | Cast Brûns | Cast Brûns | ||
| - Stopholder tube cover (top contact) | Silver electrolytic copper, with a minimum thickness of 8 um | Silver electrolytic copper, with a minimum thickness of 8 µm | Silver electrolytic copper, with a minimum thickness of 8 µm | ||
| - Eye hook for pole operation | Cast Bronze, with minimum mechanical resistance of 200daN | Cast Bronze, with minimum mechanical resistance of 200daN | Cast Bronze, with minimum mechanical resistance of 200daN | ||
| - StopHolder Tube materiaal. | Fiberglass with internal coating in moisture-proof vulcanized fiber | Fiberglass with internal coating in moisture-proof vulcanized fiber | Fiberglass with internal coating in moisture-proof vulcanized fiber | ||
| - Fuse holder opening and closing mechanism (fuse holder base) | to avoid fuse holder tube un-alignment greater than 15mm | to avoid holder tube un-alignment no more than 15mm | to avoid fuse holder tube un-alignment no more than 15mm | ||
| Suitable for chicote fuses with removable head (Arc shortening rod) | Ja | Ja | Ja | ||
3 | Fixing Accessoires | ||||
| - Soart fixaasje | Type B, according to ANSI/IEEE C37.42 | Type B, according to ANSI/IEEE C37.42 | Type B, according to ANSI/IEEE C37.42 | ||
| - Materiaal | Galvanisearre stiel | Galvanisearre stiel | Galvanisearre stiel | ||
| - Materiaal Standert | ASTM A575 | ASTM A575 | ASTM A575 | ||
| - Galvanizing Standert | ASTM A153 | ASTM A153 | ASTM A153 | ||
| - Minimum average thickness | μm | 86 | 86 | 86 |
Produkt detail Foto's:
Ferlykbere produktgids:
We have our own sales team, design team, technical team, QC team and package team. We have strict quality control procedures for each process. Also, all of our workers are experienced in printing field forOEM Famous PT Pricelist –Silver Electrolytic Copper Expulsion Fuse – Holley, The product will supply to all over the world, such as: Houston, Victoria, Iraq, In order to make more people know our products and to enlarge our market, we have devoted a lot of attention to technical innovations and improvement, as well as replacement of equipment. Last but not the least, we also pay more attention to training our managerial personnel, technicians and workers in planned way.
